NEW 15M FUEL BARGE  

Price
US $850,000 Need Finance?
Length
50' 10" - 15.50m
Location
Ex Shipyard, Hong Kong Need Insurance?
Model Year
2015
Hull Material
Steel

Price
Description: 15m Fuel Barge
The vessel is to be designed twin screw driven workboat and built accordance with General arrangement Plan (G. A) the plan attached the contract.. That accompanies this specification the hull and wheelhouse is to be of all welded steel construction. The wheelhouse and control bridge will be starboard side and shall have large windows with all round vision. The hull will be divided into 4 compartments by watertight bulkheads. The boat will be propelled by two marine engines, each driving fixed pitch propellers.

Region
Asia
Location
Ex Shipyard, Hong Kong
Reference
865148
Model Year
2015
Length
50' 10" - 15.50m
Beam
7.0m (22ft 11in)
Draft
0.75m (2ft 5in)
Displacement
Abt. 50 tons @ Lightship condition
Hull Material
Steel
Engine
Power Plant (Propulsion) 1) Propulsion engine for the boat 15.1 MT The boat will be powered by: 2 x MAN Diesel Propulsion Engine 440hp at 2220 rpm. The engines will be in accordance with standard delivery, equipment and specifications. The engines will be installed on shock absorbers suitable for this engine in order to minimize vibrations. 2) Auxiliary engine The boat will be powered by ; 1 x Marine Diesel Generator Engine Cummins ONAN or Caterpillar 17 KW at 1500 Rpm Local Operation Panel mounted on the Generator and contains oil pressure gauge, water temperature gauge and tachometer with combined hour meter. 3) Power pack 380V electric supplied power pack to be arranged to supply power for all the hydraulic systems. 4) Accessories The following accessories to be provided: Exhaust manifold with flexible fittings. The a water lock, wet type Fuel filters with water traps. Air filter, dry type. 5) Gearboxes Reverse reduction gearboxes to be engine mounted and of good marine quality. Gearbox Gearboxes shall be connected to the main engines via a flexible coupling Gearbox reduction ratio 4.1. 6) Gauges and Instrument panel The helm control console shall be fitted with a comprehensive engine monitoring instrument package from MAN. Gauges and Instrument panel on the Bridge will include: Tachometer/Hour Meter Water temperature gauge Oil pressure gauge - engine Start/Stop switch Ampere meter and battery charge meter Rudder indicator Alarm panel to include: Oil pressure - low Temperature jacket water - high 7) Spare parts Spare parts are optional and following spare parts will be delivered with boat; 2 x Propeller (1 left, 1 right) 2 x Propeller Shaft 2 x Mechanical seal 4 x Bearings for propeller shaft 8) Cooling System The sea water supply system consists of two sea chest/filter arrangements cross-connected via valve. Valves should be Gate valves and ball valves. Each engine is provided with a closed cool
Fuel
25.9 m3
Water
4.8 m3
Ground Tackle
Fenders
All around the boat at deck level round half-pipe shape steel fender (abt. Dia 200) to be installed. At Push bow D type fenders will be mounted vertically as shown in a GA plans, 300mm Diameter One roller will be installed at fore deck with same level of main deck.

Mooring, Outfit and Anchor
One (1) anchor with 12 mm. Chain and 30 m length.
Hydraulic operated windlass. 1 ton capacity
Anchor will be stored at the fore deck.
Four (4) synthetic mooring ropes 20 m. Each, 30 mm. Circumference.
Strong Steel bollards for mooring to be fitted two fore and two aft.
One roller to be installed main deck level aft of the vessel.

D3- Anchor Windlass
Local Manufactured 1 ton capacity, hydraulic windlass with a 120 Kg Anchor and 100 meters of 14mm diameter chain.
Safety Gear
Safety Equipment
8 x Life Jackets equipped with whistle, light or light stick
4 x Life Buoys to be provided
1 x First Aid Kit
1 x Fire & GS pump with hose and nozzle

Fire Fighting
Two portable fire extinguishers 5 kgs dry powder type will be placed in the wheelhouse.
Two portable fire extinguishers 5 kgs dry powder type will be placed in the Engine Room One portable fire extinguisher 5 kgs dry powder type will be placed in the Galley
Electrics
Electric System
General
-All equipment will be labelled to show clearly their function
-Generators Electrical system will be 220 V and 380 AC 3 phase will be available.
-The low voltage is to be a 24 volt DC system
-The battery charging system is designed to ensure that all batteries can charged all times from main engines.
-Main and auxiliary engines starters and alternators are to be 24V

All electric and electronic equipment is to be suitable for continuous duty marine service,
Installation will be according to good marine practice.

Cables and wires
All cables and wires of approved marine type and to be secured by clips and mechanically protected where necessary, or laid in cable channels. Control cables to have spare conductors according to shipyard practice,
Where exposed to mechanical damage, cables to be suitably protected.
All cables to be labelled by labels numbers.
Electrical connections to engines via plug-in system

Switchboards and Circuit Breakers
Switchboards/distribution installed within the panels to be easily accessible for operation and maintenance.
The switchboard shall contain the following:
- Main switches (To be installed outside of the Box).
- Circuit breakers for the following consumers:
1. Windshield wipers washers
2. Signal horn
3. Searchlight
4. Navigation lights including towing lights
5. Interior lights
6. VHF, radar GPS, deep sounder
7. Rudder angle indicator (if installed)
8. Bilge pump
9. Fire Pump
10. Fuel transfer pump
11. Sockets
12. Floodlight aft
13. Compass
14. Intercom for Control room & Galley area
15. Walkie talkie - 4 units
16. Spare

Fuses and breakers to be in one switchbox and located in the wheelhouse console, easily maintained and operated by the helmsman.
Circuit breakers shall be clearly marked with nameplates.
Electronics
Wheel house
Wheelhouse will be fabricated in steel about 2100 mm. Height and will be placed at the Mid-ship starboard side as seen on the general arrangement section of the boat for easy operation. Windows sizes as shown on plan good view of aft and fore decks. Windows and doors will be placed as GA plan. The wheelhouse will be fully air-conditioned.
The wheelhouse ceiling, walls are to be insulated.

Engine control panel & audio/visual alarm will be installed to control oil pressure, cooling water temperature, engine tachometers, batteries charge ampere meter and additional instruments needed to effectively control the propulsion system.
- Steering wheel hydraulic
- Window wipers
- Navigation lights switches
- Compass
- Signal horn switches
- Search light switches.
- Switch board
- Fire extinguisher
- Electronic and electrical equipment.

Rudder and Steering Equipment
Rudders
Two pcs -single plate type rudder with:
Rudder blade, Rudder stock welded to the rudder blade.
Watertight sealing on top of the tubes (top to be above waterline).
Top of tubes to be supported by strong back supported from hull structure.
Tillers connected by tie bar.

Steering Gear
Steering provided with a manual powered hydraulic system that controls the rudder position.
Model: Data Hydraulic Steering Gear
Total Rudder Angle: 2 x 37 deg.
Cylinder: 1 pcs
Helm Pump type: 1 pcs
Shaft: 2 x 80 mm. Diameter
Stern tube: 2 x Brass sleeve oil resistant rubber bearings
Rudder: 2 pcs

All hydraulic pipes will be seamless of high-pressure steel pipe, Position of rudder to be read on an analog rudder indicator. Filling of hydraulic oil to be easy accessible located.
Deck Gear
D1-Deck Crane:
Shipyard Manufactured Crane will be 12 TONMETER
Knuckled boom crane will be placed at the port section of the vessel.
Slewing ring, reduction gear, hydro motor, hydraulic pump, control valves,
Wire drum included in the construction.

D2- Windlass:
Towing Winch; 1 x hydraulic operated winch Capacity 10 ton max
Remarks
PRICE: USD 850,000 delivered (without class certificate); USD 965,000 delivered (with class certificate - BV, GL, etc)
Depth: abt. 2.4 m
Tank Capacity (Total): abt. 117.000 Liters.

Intent
The purpose of this Technical Specification is to define the basic design requirements for a 15-M Multipurpose Work barge to serve the coastal area
The Bidders / Shipyards (herein called "Builder") are to offer a proven design of such a boat and a full building specification to the owner, (herein called "Owner").
All correspondence plans and documents under these Specifications to be in English.
All labels will be in English.
All units of measurements for this Boat will be in metric units.
The Owner holds the right to supervise in all times the building/outfitting/preparation of the boat to be supplied, by his representatives or other nominated by him.

General Description
The vessel is to be designed twin screw driven workboat and built accordance with General arrangement Plan (G. A) the plan attached the contract..
That accompanies this specification the hull and wheelhouse is to be of all welded steel construction
The wheelhouse and control bridge will be starboard side and shall have large windows with all round vision.
The hull will be divided into 4 compartments by watertight bulkheads.
The boat will be propelled by two marine engines, each driving fixed pitch propellers.

Classification & Regulations
The shipyard built the vessel in acceptance of good marine standards and delivery them to the buyer in working condition furnished by all means as describes in specifications.

Modification.
Additional works modifications requested by the buyer after signed of the Contract, shall be priced separately by the shipyard and will be collected by the buyer prior commencing the requested extra works and obviously extend the delivery time that has been accepted before.

Materials and Workmanship
All materials will be new, of first class marine quality. Wood to be durable hardwood, well-seasoned, and well preserved. The workmanship of the hull and fittings throughout shall be of good marine practice.

Construction
The hull and wheelhouse will be constructed of steel plate all steels will be shot blasted before fabrication. In way of bollards and lifting eyes, deck will be strengthened by internals and reinforced under additional stiffening will be provided as necessary in way of engine seats.

Compartments
The boat's hull will be divided into four watertight compartments.

Fore Peak
The fore peak will serve as water ballast tank. Access from store room will be provided, through watertight opening on fore peak bulkhead.

Cargo Tanks
Cargo Tanks spaces between fore peak bulkhead and engine room fwd bulkhead. Access to Cargo Tanks area via W. T. Door in Engine Room and through a stairs from Galley on main deck.

Instrument panels arranged in an ergonomic way to have good visibility angles and ease of operation by the helmsman. One comfortable chair shall be installed on adequate foundations.
Additional upholstered benches for 2 crews seating or sleeping.
Benches, top lift, and provided with lockers under for storage of life jackets and any other equipment.
Linings / Ceiling Face will be laminate plywood white color. Panel joints will be hard wood, all wood will be well seasoned good quality.

Tank Storage
The boat will be equipped with:
8 x Cargo Tanks - Total: 82.4 m3
1 x Grey Water Tank - 3.9 m3
1 x Sewage Tank - 0.2 m3
The tanks will be situated according the G. A Plan.
Filling from deck and vent pipes with flame arrestor to open air.

Aft Compartment / Steering gear compartment
Access to the compartment through hatch with ladder on main deck

Outfit and Equipment
Hatches
One bolted W. T. Access hatch will be provided on main deck above the Engine Room, for engine maintenance and/or removal of engine parts.
Secondary hatch will be provided on aft of galley to serve as ventilation opening during maintenance and as entrance and escape hatch. Entrance ladders are to be installed.

Doors
Steel doors for access to wheelhouse with window will be provided in the port bulkhead.
All opening covers and doors will be closed by dogs. The doors according The G. A Plan

Windows
Windows will be provided all around the wheelhouse.
Frame profiles between windows to be as narrow as possible so as not interfere with the visibility. The forward windows to be provided with electrically operated, wiper.

Mast
A steel mast will be fitted to top of the wheel house folding type shall be designed to carry the navigation lights and antenna.

Railing
Outside railing will be provided around the superstructure.
Height of railing shall be below windows. All railing shall be steel tubes.

FOR MORE DETAILS:
http://www. Seaboats. Net/new-build-15m-fuel-barge-xidp865148. Html

SELLER DETAILS
Broker / Dealer
SeaBoats
Telephone
Fax
64 3 337 6259
Address
PO Box 6261
City
North Sydney
State
NSW
Country
Australia
Website


EMAIL THE SELLER FOR MORE INFORMATION