65FT MULTI-PURPOSE TUG / WORKBOAT  

Price
US $295,000 Need Finance?
Length
65' - 19.81m
Usage
Commercial
Location
California, USA
Launch Year
Hull Material
Steel

Price
Description: 65ft Multi-purpose Tug / Workboat
The Sammy G is a conventional twin screw multi-purpose tow and workboat. Large aft deck with tow and line winch. Suitable for towing, anchor handling, crew and materials deliveries and general service work. The Sammy G is also equipped with a hydraulically operated "A-Frame. Presently, the "A- Frame" is not in service and is being stored at the owners facility in California.

Region
South America
Location
California, USA
Reference
1700
Launch Year
1962
Builder
San Diego Marine Construction San Diego, CA
Length
65' - 19.81m
Beam
5.49m (18ft)
Displacement
Light Displacement Draft: 2.5 ft.
Hull Material
Steel
Engine Make
John Deere
Engine
Model TZER 11
Number Engines
2
Horse Power
2 X 350hp2 X 350hp
Genset
1 Isuzu/Model 4LEI 20 kW One (1) Northern Lights 20 kW
Fuel
3500 Gallons
Water
180 Gallons
Electronics
Radar: JMA-2254
Plotter: Garmin GPS Map 4210
Radios: Standard horizon eclipse
AIS: FA-150
Auto Pilot: Com-Nav 1001
Compass: 5" Dirgo Compass with correcting spheres
Remarks
Gross Tonnage: 54 GT
Net Tonnage: 36 NT
Shell Plating: 1/4" Steel Plate
Frames: 6" x 3/8" on 25" Centers
Deck Plating: 1/4" Steel Plate
Keel: 5/8" Steel Plate
Bulkheads: 1/4" Steel Plate
Starting System: Each Engine fitted with a 12V Starting System
Transmission: Twin Disc Marine Transmission
Engine Control: Twin Disc Trans Engine Control
Pumps: Bilge, Fire, Fuel Oil Transfer, and General Service Pumps located in Engine Room.
Steering System: Hydraulic steering system located in compartment immediately aft of engine room

GENERAL LAYOUT
Fore Deck: Clear Fore Deck witted with mooring bollards and two (2) fairleads forward. Anchor affixed to port bulwark.
WheelHouse
Electronics and Maneuvering Equipment Forward
Ships Wheel Forward
Captain's Chair Midships aft of Maneuvering Panel Port Lights
Three (3) Forward Four (4) Port
Three (3) Starboard Two (2) Aft
Doors - Port and Starboard
Galley Starboard Side with refrigerator, single sink, coffee maker, and microwave.
Two (2) Berths port side Switch Board starboard aft
Sundry Spares
SOLAS equipment
Engine Room Access
Ladder to Flying Bridge aft

Flying Bridge
Maneuvering Station forward
Mast with Yardarm, Flag Hoist and Navigation Lights Aft
Radio Antennas Aft
Engine Room Stacks Starboard Aft

Aft Deck
Rounded stern with fenders Deck sheathed with wood
A-Frame Fittings
One single drum 20 ton Tow/anchor handling winch with 3/4" wire rope and capstan 20,000 pound line pull. 60 fpm line speed
Yanmar Four (4) Cylinder PTO
Towing Bits, Mooring Cleats and Fairleads aft

Under Deck
Forward Compartment: Storage Area and Five (5) Additional Bunks.

Engine Room Midships
Machinery Details Above
Lube Oil: 115 Gallons
Aft Compartment: Steering Engine Room

The Sammy G was last Dry-Docked December 2017 with the following work performed:

1. Flat Bar Frames in way of port outboard rudder post replaced
2. Port Rudder Strut gouged and rewelded
3. Lazzarete Bilge Suction replaced
4. Propellers removed, tuned and balanced and replaced.
5. Following areas needle gunned and repainted
a. Bow
b. Forward Bunk Room
c. Lazzarete
d. Deck Plate at Stern Rollers
e. Bottom Coated with Antifouling Paimt f. Zinc Anodes found in good condition

SELLER DETAILS
Broker / Dealer
SeaBoats
Telephone
Fax
64 3 337 6259
Address
PO Box 6261
City
North Sydney
State
NSW
Country
Australia
Website


EMAIL THE SELLER FOR MORE INFORMATION
MORE BOATS FROM SEABOATS