The vessel has 3 Double Berths, 1 forward 2 aft, all with basins and plenty of cupboard space.
Rear Port cabin has wardrobe with hanging space. A spacious saloon with large dining table with wine rack in the centre and 12v fan.
Galley with double sinks, hot and cold water, pantry, 3 burner force 10 stove and oven. Gas detection safey system and fridge freezer. She has a good size navigation system, plug in with 240v and lots of power points for marina living. Flat screen TV and JVC bluetooth unit. Marine brass clock, barometer and tide clock. She has 2 electric heads with hot and cold showers & cold shower on drop down marlin board. 12v supply from 4 x 75 a/h new and 1 x 150 a/h batteries. 240v charger and 2 x 200w Solar panels connected via 40amp MPPT controller, Lithium compatable.
VHF Transciever ICOM IC
Raymarine ES78 7" Multifunction display with down vision sonar, wifi and australian/ newzealand charts.
AIS650 Class B transiever c/w GPS antenna
Active AIS Splitter 100
Sea Talk STI STNG adaptor interconnection BUS
Raymarine ST6000 Auto Helm
Raymarine ST60+Depth Instrumentation.
Raymarine ST60+Speed Instrumentation.
Raymarine ST60+Compass Instrumentation.
Raymarine ST60+Wind direction and strength Instrumentation.
New Plastimo Compass at Helm.
All Standing Rigging has just been professionally replaced, receipts available.
Running Rigging in good condition.
Furling head sail and fully battened main on a fractional rig.
Hull speed 8 knots.
Sail Area/Disp 1:18:24 High Performance.
50hp Perkins Prima M50 Diesel
Just professionally serviced, water pump replaced.
Bronze 2 blade prop 181R2YZ
125 Litre Diesel tank
500 litres of water in 3 tanks inc Hot water System
Bunbury Region Busselton WA
Jean Berret/Phillippe Stack
40' 3" - 12.27m
Keel / Ballast
Wing Keel, solid steel 2608kg
70m of Galvanised Chain, Windlas, 20kg Bruce Anchor
3 x Life Jackets
2 Manual, 1 Electric and 1 automatic on float switch
FlyingTyke is in good condition with many upgrades, has just had a survey with all recommended repairs completed except minor osmosis. The Tyke has just been put on the hard and we are chemically stripping all the antifoul off this weekend. Initial inspection shows no major damage and will be easy to repair. The hull is approx 23mm thick, this will not be a problem. After repairs we are going to coat the whole hull in a new gel coat.