2019 WINNING YACHTS 14.5 POWER CATAMARAN - New Boat Library
Length
47' 7" - 14.50m
Usage
Family, Leisure, Cruising
Model Year
2019
Hull Material
Aluminium
Description: Winning Yachts 14.5 Power Catamaran
Here you have the best of both worlds. All the hard construction has been done and only the final fitout needs completing to a new owners specifications and latest trends, colours and electronics.
Model Year
2019
Designer
Peter Winn
Builder
Peter Winn
Length
47' 7" - 14.50m
Beam
7m approx
Draft
. 900m
Displacement
13,500kgs Approx
Hull Material
Aluminium
Deck Material
Aluminium with nonskid surface applied over.
Engine Make
Steyr
Engine
Two Turbo charged Styer 240hp (179kw) Currently aboard in dedicated engine bays aft with large deck hatches, (not under bunks) but not fitted into place as yet. Purchaser will need to factor in having the shafts and props supplied and engineered into place. Both engines are new and have consecutive engine numbers as they were purchase together.
Assorted parts and manuals for engines in storage.
Horse Power
240hp
Fuel Type
Diesel.
Engine Hours
New
Propulsion
Shaft Drives to props (supplied by purchaser).
Fuel
2,000lts Approx. Four tanks integral to hull forward of engine rooms. With large inspection ports.
Water
Approx 800lts.
Accommodation
There is a large raised area for the nav station and galley as you come through the companionway door out of the aft cockpit. Step down forward into the saloon area that has a full and uninterrupted view forward. Port and starboard steps lead down into the accommodations.
Shower
There are two wet areas aboard and ready for fitout.
Ground Tackle
Maxwell VWC 2200 windlass comes with the boat but not fitted.
Bilge Pumps
Asstd Bilge pumps, new but not fitted and in storage.
Electrics
Vessel has been set up to accommodate both 12v and 240v with most cabling in place but no terminations are fitted.
2 x IZZY Power invert-ers. Come with the boat but in storage.
2 x Wiper motors and blades. Come with the boat but in storage.
Assorted 12v lighting for the boat in storage.
Fibreglass Battery box in storage.
Electrolux Washer/ Dryer fitted in laundry cabin forward in port hull.
2 x IZZY Power invert-ers. Come with the boat but in storage.
2 x Wiper motors and blades. Come with the boat but in storage.
Assorted 12v lighting for the boat in storage.
Fibreglass Battery box in storage.
Electrolux Washer/ Dryer fitted in laundry cabin forward in port hull.
Deck Gear
Aluminium Instrument Mast fabricated and painted. Comes with the boat but in storage.
Composite saloon table with aluminium trim. Comes with the boat but in storage.
Anodes for the boat in storage.
Asstd Hatches and doors (fibreglass) plus moulds in storage.
Bed head for one berth new and in bubble wrap in storage.
Stainless Steel access ladder for port-side berth, not fitted.
Boxes of miscellaneous parts and accessories in storage.
Numerous Flex Tube, pipes and cables in storage.
Safety rails welded to hull.
Grab rails welded to superstructure.
Hull painted from waterline up and in good condition as you can see from the images provided. Deck and cabin tops also painted but will need some final nonskid to some traffic areas and some touch ups just prior to completion.
Weaver Offshore deck hatches are fitted.
Mooring cleats welded to deck.
Tender Davits fitted.
Steps down to waterline in each hull.
Glass by Australian Marine Windows Clontarf and fitted to a very professional standard.
Watertight bulkheads both fore and aft.
All through-hull fittings are welded pipe and hull plate thickness here has been doubled up and is a testament to quality of build.
Composite saloon table with aluminium trim. Comes with the boat but in storage.
Anodes for the boat in storage.
Asstd Hatches and doors (fibreglass) plus moulds in storage.
Bed head for one berth new and in bubble wrap in storage.
Stainless Steel access ladder for port-side berth, not fitted.
Boxes of miscellaneous parts and accessories in storage.
Numerous Flex Tube, pipes and cables in storage.
Safety rails welded to hull.
Grab rails welded to superstructure.
Hull painted from waterline up and in good condition as you can see from the images provided. Deck and cabin tops also painted but will need some final nonskid to some traffic areas and some touch ups just prior to completion.
Weaver Offshore deck hatches are fitted.
Mooring cleats welded to deck.
Tender Davits fitted.
Steps down to waterline in each hull.
Glass by Australian Marine Windows Clontarf and fitted to a very professional standard.
Watertight bulkheads both fore and aft.
All through-hull fittings are welded pipe and hull plate thickness here has been doubled up and is a testament to quality of build.
Remarks
We are delighted to assist the seller in finding a new owner to finalise his dream build. On file we have a many current photos (taken 08-19) that will show her quality of build and stage she is up to. I have personally been aboard and taken these shots and had a good look through the vessel where she sits today.