NEW 40M 4400BHP AHT UTILITY TUG  

Price
US $3,950,000 Need Finance?
Length
131' 3" - 40.00m
Usage
Commercial
Location
East Malaysia
Model Year
2021
Hull Material
Steel

Description: 40m 4400bhp AHT Utility Tug
40m 4400bhp AHT Utility Tug. Trial Speed: 11-12 knots. Deadweight: 345 tons. Deck Loading: 5 tons. Clear Deck Area: 150 (Approx. ). Bollard Pull: 45-56 ton (Approx. ). Main Engine: Two (2) units x Cummins S16R-MPTK Marine Diesel Engine Rated 1,850 BHP @ 1,650 RPM. Propeller & Kort Nozzle : Two (2) units of Solid 4 Blades Manganese Bronze Propeller.

SeaBoats are International Ship Brokers & Yacht Brokers, marketing and selling a wide range of boats and ships, recreational and commercial, new and used, to broad global audiences. Our dedicated international teams of are strategically located around the world and utilize modern communication strategies and a vast network of industry associates.
Whether buying or selling, let the SeaBoats team work for you.

Region
Asia
Location
East Malaysia
Reference
3729
Model Year
2021
Length
131' 3" - 40.00m
Beam
11.80m (38ft 8in)m
Draft
3.80m (12ft 5in)m
Hull Material
Steel
Engine Make
Cummins
Engine
S16R-MPTK Engine Rated Propeller & Kort Nozzle : Two (2) units of Solid 4 Blades Manganese Bronze Propeller (Men trade, Malaysia or equal) c/w Mild Steel Kort Nozzle
Number Engines
2
Horse Power
1,850 BHP @ 1,650 RPM c/w Reintjes WAF- 773 Gearbox Ratio 6.440:1 with Classification Certificate
Fuel Type
Marine Diesel Oil
Cruise Speed
11-12 knots
Thrusters
One (1) unit 5.0 tons Schottel Bow Thruster Model: STT1 transverse to be installed.
Genset
3 units x CAT C6.6 Marine Diesel Engine c/w Alternator 143KW, 415V, 3PH, 1500 RPM (Power Management System with Auto Synchronize)
Fuel
370 Litres
Water
F. W. Capacity: 100 Litres. B. W. Capacity: 43 L
Accommodation
Engine Room
The engine room is to house the main engines, generators, pumps and compressors facilitate easy access for operation and maintenance. Machinery with exposed moving parts which constitute a potential danger to personnel shall be protected with screens, handrails or both. All wet and / or slippery areas shall be provided with non-skid walking surfaces. Mild steel cheeker floor plates fastened by stainless steel countersunk screws are to be laid. In addition to main engine and generators, the following items shall be supplied and fitted in the engine room:-
One (1) 0.50 m3/hr. Oily Water Separator (Korea make)
Two (2) Twin Rancor Fuel Filter
Two (2) Engine Room Blower Fan 28"
One (1) Lube Oil Tank c/w sight glass
One (1) Engine Telegraph
One (1) Tool Bench c/w bench vice
One (1) Tool Cabinet
Mess Room
One (1) mess room situated on the main deck as shown on the General Arrangement drawing is to be fitted out generally as follows:
Upholstered chairs or settee(s) with stowage under
Dining table(s) with formican top and edge fiddles
One (1) side board and cabinet
Wall and ceiling light with on/off switch
One (1) clock, battery quartz type
Four (4) 220/1/50 power sockets
Accommodation-Master/Chief (Single Cabins)
1 built-in berth of 2000mm x 900mm x 150mm foam mattress with drawers and bunk light
1 desk with drawers and light
1 upholstered chair
2 built-in wardrobe c/w shelf, hanger rod and hooks with lifejackets stowage on top
2 coat hooks on back of door
1 quartz battery clock
1 command talkback system
1 x 4 drawer steel filing cabinet with locks
2 x 300mm dia. Scuttles with deadlight covers
2 power points 220/1/50
1 attached toilet module or alternative
Accommodation-Two-Man Cabins
One (1) two-man cabins, situated on the forecastle deck are to be fitted identically as follows:-
1 x 2-tier berth of 2000mm x 800mm x 150mm foam mattress c/w bunk light, blackout curtains, drawers under and ladder for the upper bunk
1 desk with drawers and light
1 upholstered chair
2 built-in wardrobes c/w shelves, hanger rods & hooks with lifejackets stowage on top
2 coat hooks on back of door
2 power points 220/1/50
1 attached toilet module or alternative
Accommodation-Four-Man Cabins
2 x 2-tier berth of 2000mm x 800mm x 150mm foam mattress c/w bunk light, blackout curtains, drawers under and ladder for the upper bunk
1 desk with drawers and light
1 upholstered chair
4 built-in wardrobes c/w shelves, hanger rods & hooks with lifejackets stowage on top
4 coat hooks on back of door
1 x 300mm dia. Scuttles with deadlight covers (for those are on the main deck)
2 power points 220/1/50
1 attached toilet module or alternative
Cool & Freezer Room
The cool and freezer room are to be situated as shown on the General Arrangement. They are to be cooled by a fully automatic refrigerating plant with seawater cooling pump. Deck, sides and deck head are to be insulated with foam plastic respectively. The internal finish will be covered by plywood with stainless steel for side and ceiling. Thickness and type of insulation are to be in accordance with the recommendation of the manufacturer for the refrigeration machinery.
The door is to be stainless steel insulated door with door alarm connected to the wheelhouse and able to open from inside.
Galley
Galley corner fitted with Stainless Steel Sink and Drawers and Shelving below, Dandling Cupboards.
One (1) Two-door Stainless Steel Refrigerator
One (1) unit 8" blower fan
Three (3) spare point (to be located at appropriate location)

Wash Place & Toilet
One (1) WC pedestal c/w seat and lid, toilet roll holder and grab rail
One (1) shower cubicle with hot and cold F. W. Supplies, grab rail, curtain, soap dish and separate scupper drains
One (1) washbasin with hot and cold F. W. Supplies c/w water trap
One (1) mirror with tray and light
One (1) towel rail
Two (2) coat hooks
One (1) extractor grille
Stove
One (1) 4 x Burner Hot Plate with Oven
Hotwater System
Marine Hot Water Centralized Heating System complete with 150Ltr tank (Korea Make)
Shower
One (1) shower cubicle with hot and cold F. W. Supplies, grab rail, curtain, soap dish
Entertainment
One (1) color T. V. 32" c/w DVD player
Air Conditioning
CARRIER Brand
Ground Tackle
30mm electro hydraulic anchor windlass c/w double gypsy and double warp end of 350mm diameter base on class requirements (Marine Equipment, Singapore)
Two (2) units of 900-kgs Stockless Bower Anchor, based on class requirements. (China Make)
Fourteen (14) shackles of 30mm dia. Grade u2 stud link cable, based on class requirements. (China Make)
One (1) unit of 60-tons Drum Pull @ 6m/min (1st Layer), 120-tons Brake Holding Waterfall Double Drum Towing Winch. Both drums capacity of 48mm Dia. X 1000m c/w wheel house & local control system (Marine Equipment) (Steel Wire Rope supplied by Owner)
Two (2) units 5-tons x 10m/min Single Drum Hydraulic Tugger Winch. Drum capacity of 22mm Dia. X 250 m. With local control system (Marine Equipment)
(Steel Wire Rope supplied by Owner)
One (1) set of 200-tons schematic hydraulically operated anchor handling fork (hydraulic refreshable shark jaw) to be installed in center line
Safety Gear
One (1) seawater pump (FFS, Norway) each 1200 m3/hr. At 14 Bar. Pump to be driven by Main Engine (Mitsubishi S16R-MPTK @ 1,850hp) Power Take Off (PTO).
Independent sea suction and piping system for the pump. The pump casing to be cast steel, shaft acid proof steel & impeller of Al-Bronze.
Capacity: 2400 m3/hr.
Head: 120 MLC
Pump Speed: 1800rpm
Power Absorbed: Maker requirement
Driver Power: Maker Requirement
Fire Monitors (water/foam)
Two (2) units water foam monitors (one with double barrel for foam discharge). Electrical remote control from the wheelhouse.
Two (2) hand wheels for emergency manual control also bu
Bilge Pumps
Two (2) units ITUR Centrifugal Pump of 36m3/hr. At 35m total head.
Life Raft
Inflatable life raft for 20 persons Double skinned canopy, inflatable floor and weather tight seal
Fire Protection
External firefighting system is to be as generally stated below and is required to meet 2400m3 /120m
Electrics
Engine Control System
Electronic Engine Control: 2 station twin engine controls for mechanical throttle and mechanical clutch
Control Consoles in Bridge: Forward and aft engine maneuvering control consoles and main winch controls to be installed at the bridge and fitted with all required instruments. Main engines shall be controlled remotely by electrical power from the wheelhouse including all safety features for safe operation of the vessel from the wheelhouse.
Engine Control Console in Engine Control Room: One (1) separate engine-maneuvering stand is to be provided and shall incorporated in control console which is to be fitted with instrument panels with all necessary temperature and pressure gauges, tachometer and etc. Emergency handling of main engines shall be provided according to Classification Society.

All Electrical Cables and accessories (switch boxes, bulbs & etc. ) will be of marine type. Running of Electrical Cable to be installed in proper trunking.
The electrical installation is to be made in accordance with the requirements of the Classification Society and IEC latest regulation.
All electrical and electronic equipment shall be accordance with modern technology for easy maintenance and simple operation. This shall include all control systems and electronic equipment as well as electrical components in engine room, engine control room, accommodation, and bridge including on deck.
Engine Control Room
Main switchboard
Machinery control console (MCC)
Office chair
2 power points 220/1/50
One (1) packaged air-conditioner
Electronics
One (1) GMDSS Radio Equipment for A3 (FURUNO or equal) -
FURUNO RC-1800T
FURUNO FS-1570
FURUNO FELCOM-15 Inmarsat-C (LRIT Compliance)
FURUNO FELCOM-15 SSAS Inmarsat-C
FURUNO FM-8800S Marine VHF x 2 sets
One (1) Satellite Compass (FURUNO SC-50 or equal)
One (1) Autopilot System (ANSCHUTZ NP-60 or equal)
Two (2) GMDSS 2-way VHF Transceivers (Mc MURDO R2 or equal)
One (1) 96NM Radar (FURUNO FAR-2117 MK3 or equal)
One (1) Echo Sounder (FURUNO FE-700 or equal)
One (1) GPS Navigator (FURUNO GP-150 or equal)
One (1) Navtex Receiver (FURUNO NX-700B or equal)
One (1) Doppler Speed Log (FURUNO DS-80 or equal)
One (1) AIS (FURUNO FA-150 c/w PE500 Heading Sensor or equal)
One (1) EPIRB (McMurdo E5,406 MHz or equal)
One (1) Weather Fax (FURUNO FX408 or equal)
One (1) Wind Indicator (Davis Anemometer or equal)
One (1) Magnetic Compass (DAIKO SR-150PK or equal)

Ship Communication
One (1) set Electric Engine Telegraph
One (1) set Talkback/Public Address System (Ving or equal)
One (1) set Battery less Telephone System (Ving or equal)

Ridge Navigational Watch Alarm System
One (1) set Wheelhouse Watch Alarm Main Unit
One (1) set Flush Type Reset Panel with dimmer
Three (3) sets Flush Type Alarm Panel
One (1) AC/DC Converter
Navigation Lights
All in accordance with BV Classification Society's Specification and requirement of the Singapore Government Authority for the intended trade of the subject tug.
Steering Gear Systems
Two (2) 2.0-tons Independent electro-hydraulic steering gear for twin screw arrangement of sufficient torque capable of 2 x 35o operational is to be fitted in the steering gear room. System to be completely independent c/w 2 pumps, incorporated with mechanical stops in the S/G system.
Working angle of rudders to be 35o port and starboard. The total turning time for 70o helm angle is to comply with Class requirement. Mechanical stops shall be fitted as per classification requirement.
Steering gear control to be from forward and aft consoles in wheelhouse. Rudder angle indicators to be mounted at both forward and aft steering positions.
Survey Details
Builder's Certificate
Certificate of Classification
Cargo Ship Safety Construction Certificate
Cargo Ship Safety Equipment Certificate
Cargo Ship Safety Radio Certificate
International Tonnage Certificate
International Load Line Certificate
International Oil Pollution Prevention Certificate
International Sewage Pollution Prevention Certificate
Statement of Compliance with the requirements for the Prevention of Pollution by Garbage
International Air Pollution Prevention Certificate
Remarks
Depth Moulded: 4.60m
Deadweight: 345 tons
Deck Loading: 5 ton
Clear Deck Area: 150 (Approx. )
Bollard Pull: 45-56 ton (Approx. )
Stern Tubes & Shafting
Stern tubes shall be fitted with inboard and outboard Deep Sea Seal and to be oil lubricated.
Two (2) stern tube oil tanks are to be fitted and arranged to feed each stern tube by gravity.
Forged steel tail shaft and intermediate shaft to be sized in accordance to rules requirements.
Forward and aft bearing to be of white metal and intermediate shaft bearing to be of roller type.
Propeller shaft brackets are to be the "Y" type, of fabricated mild steel construction, upper part to support shaft aft bossing and lower part to prevent wires entering nozzle thus protecting propellers c/w rope guards.
Sewage Treatment Plant
One (1) unit of Sewage Treatment Plant sufficiently rated for 20 crew member with the Annex IV MARPOL TREATY 73/78 and approved by Government of Korea - IMO resolution MEPC. 159(55) Approved Type (Korea Make)
Fuel Oil Purifier
One (1) unit of Alfa Laval fuel oil Purifier PA605 with automatic self-cleaning type @ 1850 L/HR capacity.

Pumps, Plumbing & Piping
Bilge / Ballast Pump : Two (2) units ITUR Centrifugal Pump of 36m3/hr. At 35m total head.
GS / Fire Pump : One (1) unit ITUR Centrifugal Pump of 36m3/hr. At 35m total head.
Fuel Oil Cargo Pump: One (1) unit DESMI Centrifugal Pump of 50m3/hr. At 50m total head.
Fresh Water Cargo Pump: One (1) unit DESMI Centrifugal Pump of 50m3/hr. At 50m total head.
Fuel Transfer Pump: One (1) unit ITUR Gear Pump of 10m3/hr. X 20m total head.
Sludge Oil Pump: One (1) unit ITUR Gear Pump of 2m3/hr. X 20m total head.
Thruster Fuel Transfer: One (1) unit ITUR Gear Pump of 0.6m3/hr. X 20m total head. (Engine Fuel Transfer pump)
FW Pressure Set: One (1) unit Southern Cross CBI 4-40 Ejector Pump of 7.8m3/hr. At 34m head c/w 300Ltr pressure Tank.
Standby Pressure Set: One (1) unit Southern Cross CBI 4-40 Ejector Pump of 7.8m3/hr. At 34m head for Standby only.
SW Pressure Set: One (1) unit Southern Cross CBI 4-40 Ejector Pump of 7.8m3/hr. At 34m head c/w 300Ltr pressure Tank
Hot Water Circulating: One (1) unit Southern Cross HBN Multi Stage Transfer Pump of 3.5m3/hr. At 15m head
Air-condition SW Cooling Pump: Two (2) units KSB Etanorm Centrifugal Pump of 36m3/hr. At 35m total head. One unit is for Standby only.
Refrigeration Cooling: Two (2) units KSB Aquavane Centrifugal Pump of 15m3/hr. At 21m total head. One unit is for Standby only.
Power Pack Cooling: One (1) unit KSB Aquavane Centrifugal Pump of 12m3/hr. At 21m total head.
Wheel House Equipment
Steering and control console fitted with instrument panel, 2 station main engine control (KOBELT or equal), switches for navigation lights, searchlights, floodlights, horn buttons, intercom & PA systems, rudder indicator, and clear view screens.
In addition to navigational and electrical equipment, the following items shall be supplied and fitted in the wheelhouse:-
Flag lockers c/w one (1) set of International Code Flags and National Ensign.
Two (2) binocular boxes c/w Binoculars 7 x 50mm
Stainless steel storm rails on consoles all around.
Chart table with drawers under and with save-all end slit on table top edge for the charts
Chart table lamp with dimmer
Two (2) Helmsman chairs with arm rest, upholstered, adjustable in height and with foot rest
Book shelf and racks of sufficient size
Upholstered settee, hat pegs, coffee table and coat hooks
One (1) anemometer - readout in bridge
One (1) Marine air horn
One (1) 300mm diameter brass ship bell
One (1) Marine clock
Two (2) 2000W searchlight with under deck controls. (1 FWD and 1 AFT)
One (1) Aneroid barometer
One (1) Inclinometer, bulkhead mounted type
One (1) Chronometer
One (1) set signal lamp
Six (6) numbers of 220V power points
Black curtain all around except FWD of Wheelhouse
Partition Wall, Wall Lining & Ceiling
All bulkhead linings, paneling and ceilings shall be of approved type Soft core arrangement - (low flame spread). Ceiling and sidewall of the wheelhouse to be properly installed with thermal insulation.
All doorways shall be of approved type fire retarded A0, B15 & C doors & doors for the engine room to be with self-closing arrangement.
All internal space to have a clear height of 2 meter from floor to ceiling.
Fenders
Sufficient 'W' Rubber Fenders on forward bow and steel fender & tires all round at appropriate places. All tire fenders shall be secured by steel eye lugs on top and below each fender tires.
Painting, Hull Finish & Cathodic Protection
All external surface of bottom and side plating of the steel hull to be sweep blasted before applying three (3) co


ABOUT THE SELLER

SeaBoats
PO Box 6261
North Sydney
NSW 2059 Australia





CONTACT THE SELLER

MORE BOATS FROM SEABOATS