Euro €235,000
46' 5" - 14.14m
Launch Year
Hull Material

Description: Sweden Yacht 45
Sweden Yacht 45 is one of the best sample of Scandinavian Yacht Building quality, durability, sleekness, safety. This teak deck sloop has a sailing efficiency without compromising on comfort, Sweden Yacht 45 Designed by Peter Norlin and Jens Ostmann Built in Sweden by Sweden Yacht in 2000 & One owner since new

SeaBoats are International Ship Brokers & Yacht Brokers, marketing and selling a wide range of boats and ships, recreational and commercial, new and used, to broad global audiences. Our dedicated international teams of are strategically located around the world and utilize modern communication strategies and a vast network of industry associates.
Whether buying or selling, let the SeaBoats team work for you.

Family, Leisure, Cruising
Launch Year
Peter Norlin and Jens Ostmann
46' 5" - 14.14m
12400 kg (27337 lbs)
Hull Material
Engine Make
Volvo Penta
Engine Brand: Volvo Penta Engine Model: D2-75 Engine Type: Inboard Engine/Fuel Type: Diesel Engine Hours: 372 hours (engine hour meter might not be accurate, rectified in 2016) Propeller: 3 blade propellers Engine Power: 75 HP Folding 3-blade Volvo Propeller Tanks Fresh Water Tanks: 3 Stainless steel (700 liters) Fuel Tanks: 1 Stainless steel (250 liters) Holding Tanks: 2
Number Engines
75 HP
Fuel Type
Engine Hours
372 hours
Cruise Speed
7 knots
Foldabble Mahogany Cockpit Table Providing Ample Cockpit Seating for 6
Large Sail Locker on Deck
Forward Deck Access to Chain Locker, Windlass Motor
Dedicated Propane Locker Aft in Cockpit
Mahogany Interior Joinery with Satin Varnish

2 x Raritan marine Heads (new 2018)
Separate Shower stall in Owner's Head with Upgraded Valve and Shower Head
Heating, Air Conditioning, and Ventilation
Diesel Heating with 8 outlets including dedicated drying Locker
Air Conditioning for Main Salon and Owners' Cabin (2016)
Oceanair Blinds for Hatches and Ports (hatch blinds include both roller shades and screens)
Upgraded Solid Stainless Steel Dorade Vents (2016)
Ample Opening Hatches and Portlights

Owner's Cabin
The forward end is effectively the owner's suite, complete with dedicated head and shower facilities. The head is sufficiently sized to have space for a separate shower area forward of the heads sited at the aft end across from the sink and vanity unit. The heads are fitted with teak grates to provide a self-draining non-slip surface. A large double berth is offset to port in the owner's cabin. The owner's cabin features ample storage provided in a selection of drawers beneath the berth and generous cupboards above. To starboard rather that the standard seating unit, is a custom-built dresser unit. The 8" thick sprung owner's suite mattress was custom made and fitted in 2018. To Starboard of the owner's cabin, rather than the standard seating unit, is a custom-built dresser unit.

There are bookshelves with folding holders which enable easy access to the books while holding them while sailing.

On the starboard side there is a bar area and neighboring locker with custom cut spots to suit glasses which are included with the sales inventory. Down the starboard side of the saloon is a large chart table and separate navigator's sea, as well as a working area with full suite of Raytheon instruments. Storage provided for large quantity of charts along with other gear, in a selection of lockers, drawers and bookshelves.

Guest/Day Head and Aft Cabins
Directly opposite the galley is the main head compartment with WC, vanity and separate shower area. The head has a connecting interior door for direct access into the port-side aft cabin. Teak sole grates are fitted throughout the heads, providing a self-draining non-slip surface.

Aft, either side of the companionway are the port and starboard aft cabins. Both berths feature queen-sized berths with white ultra-leather seating and ample stowage for two crews member's belongings. Storage includes hanging lockers, cupboards, and under-bunk areas. Both cabins are fitted with mattresses with zipper and seamless joining flap to accommodate lee cloth fittings.
3-Burner Propane Stove Oven
Stainless Steel Double Sink
Large Isotherm 24v Refrigerator, Water-cooled
Large Isotherm 24v Lower Refrigeration with Deep Freezer, Water Cooled
Kitchen fan

The galley area is situated aft of the navigator's work area. It has an U-shaped layout. Utilization of space is maximized through use of a pullout chopping board, which serves as both a worktop extension and/or infill over the double stainless-steel sink. Storage is generous including deep under-counter storage, multiple cupboards, drawers and a stand-alone multi-level dish storage cabinet. There is a kitchen fan above the three-unit hob and the oven.

Salon and Galley
The salon is laid out with the large salon table and wrap-around seating to port. Storage is provided behind the seat back together with opening lockers above.
Panasonic Stereo with speakers in cockpit and cabin
Safety Gear
Zodiac 260 roll-up dingy
Yamaha outboard 4 HP
MOB Fitted to Pushpit
Fire Extinguishers
4-person Liferaft Stored on deck Mechanical
With the steps, raised access around the engine and gearbox is good, allowing undertaking of routine tasks.
12v and 24v Systems
3 x 24v to 12v Regulators (2019)
1 x 12v Engine Starting Battery
4 x 12v Banked to Deliver 400AH at 24v
1 x Mastervolt 50A with Remote Panel and Temperature Sensor

Shore Power
220v Shore Power
Shore Power Cable
Dedicated Starter Battery
Raytheon Chartplotter
Raytheon multiple display
Raytheon Wind display
Forward and depth sonar
At Nav Station
Raytheon Chartplotter
Raytheon Depth/Speed/Temp Sensor
Raytheon Wind Speed & Direction
Bronz barometer & clock

At Helm
Raytheon Chartplotter
Raytheon multiple display
Raytheon Autopilot Control
Suunto Binnacle-mounted Compass with Light
Anchor Windless Control
Bow Thruster Control
Mastervolt 1500w Inverter (220v)
Sail Inventory
Fully battened mainsail with 5 full length batten pockets and webbing chafers. 3 reefs
Self-tacking jib
Storm jib (never had to use it)
IJPE: 1089.58sqft.
I: 59.58ft.
J: 17.42ft.
P: 58.25ft.
E: 19.58ft.
Mast / Rigging
Genasun MPPT Regulator 24V Installed on BiminiSails and Rigging
Track for Self-tacking Jib
All Reefing Lines and Halyards Led Aft to Clutches
Selden Spars Double-spreader Mast with Spinnaker Pole Stowed on Track
Selden Boom Fitted with Single Line In-boom Reefing for Reefs 1 & 2 with a 3rd Manual Reef Point.
Stainless Steel Standing Rigging
Selden Gas Strut-style Kicker
Harken Bat Car Mainsail Track System
Navtec Hydraulic Backstay Adjuster (Serviced 2018)
Selden 300 Jib Furlex Twin Groove
Keel: Fin
Ballast: 5.200 kg (11464 lbs)
Number of heads: 2
Bow Thruster
Navigation lights, Anchor Light, Steaming Lights, Tri-color, and Deck Lights
Stanchions and Guardrails with Gates
Stainless Steel Dorade Vents

Covers, Canvas & Cushions
Tan cockpit cushions with washable black covers
Silver cabintop lounge cushion
Tan bimini
Tan dodger
Cockpit cover
Tan lazy-bag

Hull, Deck & Superstructure Construction:
Hull constructed from GRP end grain balsa core sandwich molding, in way of the keel pan and mast foot the molding is a single skin solid laminate construction
Finished externally in navy blue color
Desk constructed from GRP end grain balsa core sandwich molding
Decks are finished with high-quality laid teak constructed from
solid 12mm thick teak. Teak decks have been well cared for and re-caulked
Single balanced spade rudder constructed in a GRP molding with a solid
stainless-steel rudder stock.
RCD Status: This yacht conforms with the essential safety requirements of directive 94/25EC, and is categorized A - "Ocean"

Upgraded 24v LED Cabin Lights
Fixtures including Chrome Danish Frigast Reading Lights throughout and Chrome LED
Spots (2016)

Folding Swim Platform
All winches have been serviced annually.
2 x Andersen 46ST Electric Primary Winches
4 x Andersen Self-tailing Winches in the Cockpit for Halyards, Sheets, etc.

Lewmar Electric Windlass 24V, 900W with Capstan
27kg Stainless Steel Ultra Anchor
Ample Mooring Lines and Fenders
80m Galvanized 10mm Chain
Self-draining Anchor Locker


Georgi Savchev
PO Box 6261
North Sydney
NSW 2059 Australia