Adams 70ft Cutter


1997 ADAMS 70 - "MIA LANI" | 70ft Custom Steel Bluewater Cruising Yacht

Designed by renowned Australian naval architect Joe Adams and built by Alloy + Steel Boats Pty Ltd, MIA LANI is a substantial 70ft bluewater sailing yacht, purpose-built for serious offshore cruising, comfortable living aboard and short-handed sailing.

Her robust steel hull, aluminium superstructure and masthead cutter rig combine strength, offshore capability and practical sail handling. Designed to perform in light winds while remaining capable in demanding ocean conditions, MIA LANI offers the space and equipment for extended passages and long-distance adventures.

The interior is beautifully appointed, with warm timber finishes, quality leather upholstery and generous natural light throughout. Accommodation comprises three cabins sleeping up to eight, including a spacious full-beam aft owner's suite with twin double berths and ensuite facilities. A well-equipped galley, separate dinette and comfortable raised saloon create an inviting living environment whether underway or at anchor.

On deck, separate entertaining and sailing cockpits provide an excellent balance between comfortable outdoor living and practical yacht handling. Her cutter rig, hydraulic systems and extensive winch arrangement were designed with short-handed offshore cruising in mind.

Powered by a Yanmar 110hp diesel engine and equipped with an Onan generator, air conditioning, refrigeration, navigation electronics and offshore cruising equipment, MIA LANI has an extensive history of upgrades.

Major refits were undertaken in 2012,2018,& 2024 including rigging, structural inspections and repairs, machinery servicing, electrical systems, plumbing and interior improvements.

More recently, MIA LANI has undergone further refurbishment at Gold Coast City Marina, including exterior painting, window replacements and electrical upgrades. She now presents beautifully following this latest investment.

At approximately 21.2m overall, with a beam of 4.65m and draft of 2.13m, MIA LANI offers the scale, comfort and capability expected of a serious ocean-going cruising yacht.

An impressive Australian-designed bluewater yacht with an extensive cruising and refit history, MIA LANI deserves consideration by buyers seeking a substantial offshore cruiser for extended voyages or comfortable liveaboard life.

REFIT, MAINTENANCE & UPGRADES
MIA LANI has benefited from significant refit and maintenance programs throughout her ownership history, including major works reported in 2012 and 2018, followed by further upgrades and maintenance undertaken in Darwin between 2023 and 2025, Cairns in 2025, and most recently at Gold Coast City Marina in 2026.
2012 & 2018 - Previous Ownership
Historical sales information records extensive refit programs covering hull and structural maintenance. (Full list of historical works available): 2012 - rigging replacec, engine works, LED lighting, cockpit teak, aft cabin remodel. 2018 - reported internal steel inspection and welded plating, machinery removal, electrical/hydraulic/plumbing overhaul, fuel tank inspection, exhaust/stern tube work, refrigeration, pumps, winch/rudder/vang servicing.
2023-2025 - Darwin
A further period of maintenance and upgrades included reported steel hull repairs and inspections, surface preparation and antifouling, replacement of running rigging and cutless bearing, machinery and gearbox servicing, electrical system improvements, and installation of a 5,000W Victron inverter/charger and AGM house batteries.
Additional improvements included navigation equipment, deck canvas, hatch and winch covers, and bilge system works.
2025 - Cairns
Further attention was given to the vessel's onboard refrigeration system.
2026 - Gold Coast City Marina
More recent works included antifouling, inspection and servicing of through-hull fittings, replacement of saloon windows, repainting of non-slip deck surfaces, exterior varnishing, selected halyard replacements, generator servicing, engine exhaust repaired, and further refrigeration work, including replacement compressor and condenser components.

Survey Feb 2026 available, as well as historical records.

Located on the Gold Coast, Queensland. Inspections strictly by appointment through Oceania Marine Australia.


ABOUT OCEANIA MARINE AUSTRALIA:
Oceania Marine Australia is a boutique Gold Coast yacht brokerage, owned and operated by Helen and Mark James, bringing together over 30 years of marine industry experience, professional yacht brokerage, sailing, superyacht operations and vessel management.

Helen is an experienced sailor and yacht broker with an extensive background in the Australian and international marine industry. Her approach is personal, professional and hands-on, providing buyers and sellers with knowledgeable guidance throughout the entire sales process.

For larger yachts such as MIA LANI, we offer the additional expertise of Mark James, a highly experienced professional superyacht captain holding MCA Master (Yachts) qualifications up to 3000GT, AMSA Master < 45m and MED1 engineering qualifications.

Mark's experience includes commanding large motor yachts, overseeing major refits and new builds, managing technical operations and undertaking international yacht deliveries. Most recently, his work has included a 58m Sanlorenzo new build, an 82ft Viking refit and offshore deliveries throughout the South Pacific.

Mark is available by arrangement to accompany serious prospective buyers during inspections, providing a more detailed walkthrough of the yacht's machinery, systems, engineering and operational considerations.

At Oceania Marine, we don't just sell boats -- we understand them.

For More Information: Contact Helen James on , or go to Dealer Website

Disclaimer:
Oceania Marine has prepared this information in good faith from details supplied by the vessel's owner and other sources believed to be reliable. While every reasonable effort has been made to ensure the accuracy of the information provided, Oceania Marine makes no representation or warranty, express or implied, as to its accuracy, completeness or correctness. Interested parties should make their own enquiries and satisfy themselves as to all aspects of the vessel, including its condition, inventory, specifications and suitability for their intended use. Oceania Marine strongly recommends that all prospective purchasers undertake their own inspection and obtain an independent pre-purchase survey and mechanical inspection where appropriate. Unless otherwise agreed in writing, all vessels are offered for sale on an "as is, where is" basis.

Region
Queensland
Location
Gold Coast QLD
Reference
S069
Usage
Leisure, Cruising, Live Aboard
Launch Year
1997
Hull
Steel 5mm Steel hull & 3mm steel deck with aluminium superstructure and cockpit
HIN
None
Rego
ON854857
Designer
Joe Adams - Adams Yachts Design Pty Ltd
Builder
Alloy + Steel Boats Pty Ltd
Length
70' 0" - 21.34m
Beam
4.65m
Draft
2.13m
Displacement
27,000kg
Keel / Ballast
Steel keel with approximately 9.14 tonnes of lead ballast
Deck Material
3mm steel deck with aluminium superstructure and cockpit ; teak cockpit decking.
Engine Make
Yanmar
Engine
Single Yanmar 4LH-TE 110hp (1997)
Number Engines
1
Horsepower
110hp ( 73kwa at 3000rpm, max is 81 @3300KW )
Power Source
Diesel
Engine Hours
3,933hrs
2nd Engine Hrs
N/a
Fuel Consumption
Approx 4L/hr, 2200rpms, 6-7 knotts
Cruise Speed
Approx 6-7 knotts
Drive Type
Inboard Shaft Drive : 4-blade Tristream folding propeller
Thrusters
Hydraulic bow thruster
Genset
Replacement Onan 11kVA diesel generator (2023)
Fuel
1,845L in 4 tanks, stainless midships
Water
1,100L in two tanks
Accommodation
Three cabins, including full-beam aft owner's suite with twin double berths, forward double cabin with two upper single berths, and port cabin with upper/lower bunks. Separate entertaining and sailing cockpits, teak seating, cockpit table, dodger and bimini.

Configuration: From cockpit steps down into the saloon with settee & galley to port and chart table and dinette to starboard. Then step through the main bulkhead into the accomodation area in the bow. Separate toilet & shower compartments to starboard, and twin bunk cabin to port, and double bed with two upper single berths in the bow. The expansive aft owner's cabin offers an exceptional amount of space, featuring two separate double beds, a private toilet to starboard, a separate shower to port, and a built-in desk and dressing table with mirror. The generous proportions of this cabin provide ample room for an additional double bed if desired, offering flexibility to accommodate individual requirements.
Cabins
3
Berths
8-10
Galley
Midships U-shaped galley with Corian benchtops, double stainless steel sinks, generous storage and adjacent dinette
Refrigeration
Four eutectic refrigeration compartments, plus separate freezer
Freezer
Eutectic freezer with dedicated compressor
Stove
Broadwater Marine two-burner gimballed gas stove
Water Maker
Spectra 12V, 50L/hr - (June 2026)
Hotwater System
100L, electric and engine heat exchanger - Hotwater heater replaced in 2018
Shower
Two separate shower compartments, plus cockpit shower
Toilet
2 electric toilets
Entertainment
42-inch Samsung television, leather saloon and dinette seating
Air Conditioning
Climma 12,000 BTU forward, Cruisair 16,000 BTU saloon, Siam Cooling 10,000 BTU aft
Dinghy
3.5m Australian-made Barefoot Hypalon RIB
Outboard
Yamaha Enduro 30hp
Covers
Dodger and convertible bimini; aft bimini. Boom/bow tent. Helm & Pedestal cover, Mainsail boombag
Ground Tackle
125lb Manson-type anchor, approximately 100m chain, Lewmar 3000 hydraulic windlass
Bilge Pumps
4 x Electric/Auto bilge pumps: bow locker, midships, under engine (Rule 2000 new 2026); 2 x Manual
Life Raft
Eight person Sea Air life raft - 2018 expired.
Epirb
GME EPIRB
Life Jackets
Yes
Flares
Yes
Fire Protection
Yes. Gas Alarm - Upgraded in 2024
Electrics
Victron 5,000W inverter/charger (May 2025): MultiPlus-II 12/5000/220-50 230V; Victron Cerbo Mk 2; Victron GX Touch 50; Victron SmartShunt

House Batteries: 10 x Century deep cycle industrial 6v c105 (lead acid) (May 2025)
Engine Batteries: 1 x Full Throttle battery FT1100- 12 V gel cell, Maintenance free.
Generator Battery: 1 x Century 12V Maintenance free.
Engine and generator starting batteries can be coupled/switched.

240V outlets; shore power 32amp; Australian plugs onboard.
Electronics
Depth Sounder: Raymarine
Log: Raymarine ST60+ Tridata (historical)
Autopilot: Raymarine ST6002 SmartPilot, S100 remote; drive motor replaced 2018
Wind Instruments: Raymarine ST60+ wind and graphic displays
Radar: Furuno NavNet radar
Chartplotter: Raymarine AXIOM2 Pro 12 S, HybridTouch 12" Multi function Display with Integrated High CHIRP Conical Sonar for CPT-S and Australia & New Zealand Light (2024) at the helm.
AIS Auto ID System: Raymarine (2026)
GPS: Furuno GP-32; Raymarine GPS (2018)
VHF: Icom M504 VHF DSC; Icom M801E MF/HF and AT-141 tuner; 2 handheld icom vhf radios.
Other: Suunto/Silva compasses. Starlink.
Sail Inventory
Rolly Tasker Sails December 2022:

Fully Batten Mainsail Offshore Construction: Luff 21.30 m: Leech 22.60 m: Foot 7.99 m: Area 102.11 Sq. M. ; Contender 12.65 Hybrid, Tri-radial 3 Reefs, Overhead Leech 2:1

Furling Yankee: Luff 22.85 m: Leech 19.80 m: Foot 9.90 m: Area 98.33 Sq. M. ; Contender 12.65 Hybrid, Tri-radial Luff Foam, UV Black Sunbrella on Leech and Foot on Port Side
Overhead Leech 2:1, Luff Tape Diameter 6 mm; 2x Telltale Windows

Furling Inner Jib: Luff 13.94 m: Leech 13.24 m: Foot 4.68 m: LP 91% : Area 30.97 Sq. M. ; Contender 10.65 Hybrid, Tri-radial Luff Foam, UV Black Sunbrella on Leech and Foot on Port Side; Luff Tape Dia. 6 mm, Sail insertion height 85 cm

Code-Tec Gennaker (Code C): 3.1 oz All White, Tri-radial, Area 180 Sq. M. ; (Logo: Mia Lani); on a Furler Profurl NEX 6.5 V2 with Swivel and Continuous Furling Line

Lazyjacks & boombag (zip replaced 2026)
Mast / Rigging
SPARcraft masthead cutter, keel-stepped aluminium mast, three spreaders, approximately 25.5m spar length. Boom: Aluminium, approximately 8.5m.

Standing rigging: Stainless steel wire, reportedly replaced in 2012 & 2019. The rigging was last inspected in June 2025 by Nautical Supplies Darwin.

Slab reefing, running backstays, Navtec hydraulic boom vang and backstay.
Schaefer 4000 genoa furler; genoa and staysail furling drums recorded as replaced in 2016.


Stainless bow sprit - no prodder
Deck Gear
Primaries: Lewmar 66 x 2; Secondaries: Harken 64.3 electrics x 2 ; Lewmar 62 x 1 (mainsheet). Lewmar 54 x 2 fwd at mast (halyards & reefing). 7 winches in total.
Tender davits with rod holders & jerry can holders (8 x 20L) & mounted starlink
Remarks
MIA LANI is an impressive 70ft custom-built Adams bluewater cruising yacht, combining robust steel construction, proven offshore capability and exceptional onboard comfort.

Extensively maintained and upgraded throughout her life, with major refits and more recent works covering hull and structural repairs, rigging, machinery, electrical systems and exterior finishes. Supporting documentation includes hull thickness testing, rigging inspections and a favourable February 2026 insurance survey.

Powered by a Yanmar 110hp diesel, with a replacement Onan generator, upgraded Victron electrical systems and an extensive sail inventory, MIA LANI is well equipped for extended cruising.

Below decks, she is simply beautiful. Her spacious, welcoming interior features a generous saloon, well-appointed galley and three cabins, including an exceptionally large aft owner's suite. Traditional craftsmanship, warm timber finishes and remarkable living space make her a wonderful yacht for extended cruising or living aboard.

Beautifully presented and full of character, MIA LANI is a substantial bluewater yacht worthy of inspection.


ABOUT THE DEALER

Oceania Marine Australia
Runaway Bay
Gold Coast
QLD 4216 Australia




Buy this Boat with Confidence


Boating Industry Association Member



CONTACT THE DEALER - Oceania Marine Australia

MORE BOATS FROM OCEANIA MARINE AUSTRALIA
×